Popular Posts

Saturday, January 9, 2016

A visit at the club of "Freie Zinnfigurensammler e.V."

Hi folks, :)

yesterday I´ve been to the club "Vereinigung Freie Zinnfigurensammler e.V." that I joined about 15 years ago.

At this time I was a collector of flat figures and that is what most of the older members still are.

I don´t know then but at some day my mind had changed and I wanted to collect and paint wargaming figures. For sure the shop "Eagle´s nest" in Nuremberg encouraged this change of mind very much. Thank you, Roland. :)

I remember the day then I was showing some 28mm wargaming figures of FrontRank at the club and I am still amused about the reaction especially of the older members with rolling and wide opened eyes. :) - it didn´t seem to fit in their universe of flat tin figures.

This is also about 12 or 13 years ago and times have changed extremely. 

Since a few years there are many different members showing their point of interests and though there are still a lot of flats (that I still like, too) you can have a look at some things belonging to wargaming. There are even not only tin figures but also plastic figures. 

A lot of the members are very good painters and I always like to have a look at their works.

Here are some pictures of the shown figures from yesterday´s evening. 

The last two pictures show Napoleon and his general staff casted in the 1930´s with the moulds of the company "Ochel" from Kiel. The figures are 30mm flats as all of the flats shown on these pictures are. The owner just sent them to a professional painting service in SriLanka and the figures are really great.

I like to meet the people there just to talk about the hobby and getting information about historical things for there are a lot of enthusiasts in the club, too. It´s always very nice there.

If you are interested into the club - just have a look at this link.



Cheers

Mike

I like the ancients of Mr Mutzbauer very much and his style of painting.

30-years-war.

Nosferatu

40mm figures from Matthias Manske - here a link to his website   http://www.vollplastische-zinnfiguren.de











Friday, January 8, 2016

The painted siege tower for SAGA - The Crescent & The Cross

Manufacturer:   Do-it-yourself
Scale:   28mm


Hi,

yesterday I finished my siege tower and got some paint on it. Now it is ready for gaming.

If you are interested in how I built this tower just have a look at my last post.


Cheers

Mike




Wednesday, January 6, 2016

Building a siege tower for SAGA - The Crescent & The Cross

Manufacturer:  Do-it-yourself
Scale:  28mm


Hi again,

last week there was the movie "Kingdom of Heaven" on television.

I like this movie very much, especially the storming of Jerusalem by Saladin and his army. There they use a lot of siege towers and I decided that I would also need at least one siege tower for my actual SAGA project. Just for fun and terrain.

After a quick search in the internet I found some pictures of really nice siege towers. I was so fascinated by my own idea that I started to build such a tower on sunday morning.

Using my great collection (;)) of wooden sticks, glues and other things it took me the whole day and the half of today to get it ready for painting.

For it is my first try I think that it is not too bad, though I noticed during building the tower that I could do some things easier. If I should ever build another one I will surely do so. :)

The finished siege tower - ready for painting.

A view from the back of the tower.

The chain is movable to get the ramp up and down.

And here a picture of how the tower looks like in action.

The wall segment was built with the fantastic moulds of "Hirst Arts".

So that´s the tower - but how did I do it?

If you are interested in the way I built it up here is a tutorial - but it consists of many, many pictures. :)

Using different wooden sticks - 5mm and 2mm - And I needed a lot of them.

Gluing the sticks together using clipper to fix them while drying.

Meanwhile I cut two sticks (5mm) with 16cm in length and drilled some holes in.

Within these holes I glued some wire pins.

Then I prepared 3 sticks (5mm) of 8cm in length.

The other prepared sticks got just three further holes filled with wire pins.

Then I drilled holes on top of the 8cm sticks.

Then I put the sticks together using the wire pins for better fixing of the glued connections.

The next step was building the wooden wheels. Therefore I used some washers to get at least 6 wheels.

First step was to glue some wooden coffee sticks on the washers. I got the coffee sticks from a bakery which just sold  1000 sticks to me.

I just glued coffee sticks on both sides and after the glue had dried I gave it a round shape with scissors.

After that I used sand paper to bring it into better shape.

Getting some strips of paper by cutting an old cereal box.

This was really fiddly.

The finished wooden wheels.

After producing the wheels I cut two pieces of  20cm length out of the combined sticks I fixed with clippers.


These sticks got drilled again and prepared with wire sticks. And again three sticks of 8cm length being drilled on their top ends.

The first part of the skeleton of the tower is built up.

Getting the next part into an angle of 90 degrees.

Again a hole drilled and a glued wire pin.

Then two sticks of 8cm length are glued on the skeleton to be able to fix the next part.


The skeleton is ready for getting the wooden planking.


I thought of giving the tower a ramp on the bottom. After some further steps of building the tower I realized that this ramp would make it impossible to get the tower near to the walls of the object of siege.

So later on I had to cut it off. Just one of the many things I won´t do a second time if I should build up another tower.



Getting the planking on the sides of the tower.

Just fixing the planking from the inside of the tower.

The other side finished.

Getting on the top floor of the tower - leaving some space for a ladder that will bring the men at arms on the top.

The next floor - again leaving space for a ladder.

The tower with palisades on its top.

Now it was time to prepare the tower for getting the ramp for storming the walls. As I wanted the ramp to be movable I just had to add some more wooden sticks (2x 5mm on each side) on the front side of the tower (see next picture). Again a situation I didn´t have in mind then I started with the tower.



The picture above shows a horizontal stick that was again drilled on its top ends and fixed with wire pins. But this time it was not glued to the skeleton of the tower. Only the wire was glued to the horizontal stick so the stick can be turned around (see next picture).


Then I got some planking on the movable horizontal stick. Here a picture of the closed ramp.

And how it looks like then it´s open.

Just high enough to get an 28mm scaled figure out of the tower.

As I told you above I had to shorten the ramp at the bottom or I won´t be able to get the tower next to a wall.

My next thoughts turned about an ability to get some turning roles for the chain that should hold the ramp.
Again I decided to use some washers. But I had to find something to get between two washers that was a little bit smaller. 
Taking a look at my glue I noticed that there was a plastic piece that could fit - and I had luck for it really did.




Then I got a round wooden stick. Again I had luck as the diameter of the stick just was the same as the hole within the washers.


The chain I wanted to use - I don´t know how long I call this chain my own and never had an idea for what to use it.

If you don´t know there to get such a chain from - here is the address.

First of all I glued a wire pin into the end of the chain.

The ramp got a drilled hole to get the chain through the planking.

Just a look inside the tower just to show there the turning roles had been fixed.


A second round stick with two turning roles.

This one was fixed here.

Another round stick that is also movable as the ramp itself.

And that´s how the chain was fixed in the end.


Adding ladders to the separate floors.
Now it was time to get the planking on the front of the tower. I thought of two floors that would give the attackers the ability to take the defenders under fire. So the front would need some loopholes.

Using some figures to get the right distances for the loopholes.

The front is finished.

Finally I had to fix the wooden wheels on the bottom of the tower. As the ramp I wanted the wheels to be movable. So again I cut three sticks of now about 9cm length, drilled holes into its top ends and glued some wire pins into the holes.

Then I filed the edges of the top of the sticks so that the crossbeams of the wheels would not stop the wheels themselves while turning round.

The only thing left to do was to drill holes into the centre of the wheels and to get some wheel hubs preventing the wheels to get from the wire pins.

I had the idea of using the little round areas from plastic cast frames (see the second of the following pictures).

It worked well. I filed them and gave them a round look and glued them on the top of the wire pins.




The finished tower with its wheels.

I can tell you that building this tower was a challenge for I didn´t have a construction plan or a sketch.

But I´m very proud of having passed this challenge and it was a lot of fun - though I often had to rethink some steps of building the tower.

Now the final step is to get the tower painted. 



Cheers

Mike